Index of /irradium/images/orange_pi_rv

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]boot-20250401.tar.xz2025-04-01 23:21 442K 
[ ]boot-20250507.tar.xz2025-05-07 06:10 465K 
[TXT]README.TXT2025-05-18 02:59 686  
[ ]boot-20250612.tar.xz2025-06-12 23:20 465K 
[ ]boot-20250706.tar.xz2025-07-06 20:19 467K 
[ ]boot-20250719.tar.xz2025-07-19 11:06 483K 
[ ]boot-20250726.tar.xz2025-07-27 00:38 483K 
[ ]boot-20250804.tar.xz2025-08-05 02:43 483K 
[ ]boot-20250806.tar.xz2025-08-07 02:54 483K 
[ ]boot-20250831.tar.xz2025-08-31 03:37 485K 
[ ]irradium-3.8-riscv64-core-orange_pi_rv-6.6.103-build-20250831.img.zst2025-08-31 03:39 1.0G 
[ ]irradium-3.8-riscv64-core-orange_pi_rv-6.6.103-build-20250831.img.zst.sha2562025-08-31 03:40 136  
[ ]irradium-3.8-riscv64-xfce-orange_pi_rv-6.6.103-build-20250831.img.zst2025-08-31 03:44 2.1G 
[ ]irradium-3.8-riscv64-xfce-orange_pi_rv-6.6.103-build-20250831.img.zst.sha2562025-08-31 03:45 136  
[DIR]kernel/2025-08-31 03:48 -  

Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d irradium-*-core-*-build-*.img.zst
  # dd if=irradium-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat irradium-*-core-*-build-*.img.zst > /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root
password: set at first login


Debug
-------------------
    Pin 6   is GRD
    Pin 8   is RTX (GPIO5/UART0_TX)
    Pin 10  is TXD (GPIO6/UART0_RX)