Index of /irradium/images/radxa_zero

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[TXT]README.TXT2024-03-10 04:35 715  
[ ]boot-20240310.tar.xz2024-03-10 04:25 524K 
[ ]boot-20240407.tar.xz2024-04-07 16:01 557K 
[ ]boot-20240623.tar.xz2024-06-23 12:25 557K 
[ ]boot-20240725.tar.xz2024-07-25 05:40 558K 
[ ]boot-20240929.tar.xz2024-09-30 03:09 558K 
[ ]boot-20241122.tar.xz2024-11-22 08:57 561K 
[ ]irradium-3.7-aarch64-core-radxa_zero-6.12.0-build-20241122.img.zst2024-11-22 09:14 779M 
[ ]irradium-3.7-aarch64-core-radxa_zero-6.12.0-build-20241122.img.zst.sha2562024-11-22 09:18 133  
[ ]irradium-3.7-aarch64-xfce-radxa_zero-6.12.0-build-20241122.img.zst2024-11-22 10:11 1.8G 
[ ]irradium-3.7-aarch64-xfce-radxa_zero-6.12.0-build-20241122.img.zst.sha2562024-11-22 10:23 133  
[DIR]kernel/2024-12-24 13:03 -  

Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d irradium-*-core-*-build-*.img.zst
  # dd if=irradium-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat irradium-*-core-*-build-*.img.zst > /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root


Debug
------------------
speed: 115200
pins:
    Pin 6   is GRD
    Pin 8   is RTX (UART_AO_A_TXD)
    Pin 10  is TXD (UART_AO_A_RXD)

example: screen /dev/ttyUSB0 115200,cs8