Index of /irradium/images/visionfive_2_lite
Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):
# zstd -d irradium-*-core-*-build-*.img.zst
# dd if=irradium-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M
or unpack directly to the card
# zstdcat irradium-*-core-*-build-*.img.zst > /dev/mmcblk0
Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
# transfer-to-disk
Default Login
------------------
login: root
password: set at first login
Debug
-------------------
Pin 6 is GRD
Pin 8 is RTX (GPIO14/UART_TX)
Pin 10 is TXD (GPIO13/UART_RX)
example: sudo screen /dev/ttyUSB0 115200,cs8
Flash SPI
-------------------
https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/VisionFive2_SDK_QSGLite/spl_newlite.html
cat /proc/mtd
flashcp -v u-boot-spl.bin.normal.out /dev/mtd0
flashcp -v visionfive2_fw_payload.img /dev/mtd2
irradium: u-boot-spl.bin.normal.out -> u-boot.bin and visionfive2_fw_payload.img -> u-boot.itb
Recovery
-------------------
https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/VisionFive2_SDK_QSGLite/recovering_bootloader%20-%20vf2lite.html