Index of /slackware/images/radxa_zero

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[TXT]README.TXT2023-02-12 19:18 736  
[ ]boot-20210807.tar.xz2021-08-07 11:31 466K 
[ ]boot-20210808.tar.xz2021-08-08 15:28 538K 
[ ]boot-20210809.tar.xz2021-08-10 04:25 538K 
[ ]boot-20210812.tar.xz2021-08-12 06:05 538K 
[ ]boot-20210913.tar.xz2021-09-14 03:55 538K 
[ ]boot-20210917.tar.xz2021-09-18 01:53 538K 
[ ]boot-20211116.tar.xz2021-11-17 00:12 500K 
[ ]boot-20220122.tar.xz2022-01-22 14:49 500K 
[ ]boot-20220312.tar.xz2022-03-12 08:04 501K 
[ ]boot-20220718.tar.xz2022-07-19 03:41 503K 
[ ]boot-20220802.tar.xz2022-08-02 10:13 511K 
[ ]boot-20221015.tar.xz2022-10-15 18:05 511K 
[ ]boot-20221224.tar.xz2022-12-24 06:47 511K 
[ ]boot-20230227.tar.xz2023-02-27 23:31 511K 
[ ]boot-20230501.tar.xz2023-05-01 15:23 525K 
[ ]boot-20230806.tar.xz2023-08-06 17:03 526K 
[DIR]kernel/2023-08-06 16:59 -  
[ ]slarm64-current-aarch64-core-radxa_zero-6.4.8-build-20230806.img.zst2023-08-06 17:17 516M 
[ ]slarm64-current-aarch64-core-radxa_zero-6.4.8-build-20230806.img.zst.sha2562023-08-06 17:20 135  
[ ]slarm64-current-aarch64-enlightenment-radxa_zero-5.14.5-build-20210917.img.zst2021-09-18 10:22 1.8G 
[ ]slarm64-current-aarch64-enlightenment-radxa_zero-5.14.5-build-20210917.img.zst.sha2562021-09-18 10:39 145  
[ ]slarm64-current-aarch64-server-radxa_zero-6.4.8-build-20230806.img.zst2023-08-06 17:41 752M 
[ ]slarm64-current-aarch64-server-radxa_zero-6.4.8-build-20230806.img.zst.sha2562023-08-06 17:45 137  
[ ]slarm64-current-aarch64-xfce-radxa_zero-6.4.8-build-20230806.img.zst2023-08-06 18:50 1.6G 
[ ]slarm64-current-aarch64-xfce-radxa_zero-6.4.8-build-20230806.img.zst.sha2562023-08-06 19:02 135  

Installation
------------------
Unpack the IMAGE file and copy the image an SD card: (assuming SD card at /dev/mmcblk0):

  # zstd -d slarm64-current-*-core-*-build-*.img.zst
  # dd if=slarm64-current-*-core-*-build-*.img of=/dev/mmcblk0 bs=1M

or unpack directly to the card

  # zstdcat slarm64-current-*-core-*-build-*.img.zst > /dev/mmcblk0


Instalation eMMC/NAND/USB-HDD
------------------
to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
  # transfer-to-disk


Default Login
------------------
login: root


Debug
------------------
speed: 115200
pins:
    Pin 6   is GRD
    Pin 8   is RTX (UART_AO_A_TXD)
    Pin 10  is TXD (UART_AO_A_RXD)

example: screen /dev/ttyUSB0 115200,cs8